...cl 3.0 v6 egr check engin light i replace oxygen sensor and cat and muffler and egr and the idle is still rough and gas consumption is still high ant engine rev high and car move slow and estates is ...
...acura cl 2.3 and two codes popped up the first one is code p0172 and second is p0420 they read in that order on scanner tool. could the second code cause the first code to come on but show last or is ...
...Acura CL 3.0, need to replace them The 3.0 is an ODB2 car so it has 2 o2 sensors. One before the CAT and one after the CAT. Check your headers for the primary heated o2 sensor location, and check on ...
oxygen sensor the check engine light goes on but i changed both oxygen sensors and the check engine light still appears The check engine light can come on for over 150 things, from a sensor to a loose
Where is the oxygen sensor located in a 1998 Acura 3.0cl v6 Gday mate,geoff here, the O2 sesnor will be on the exhaust manifold, a special socket is required for its removal.
...acura cl this is how it goes, this car all depending on the engine size can have 2 or3 or 4 sensors,sensors are labeled bank 1 sensor 1 or bank 1 sensor 2 and then bank 2 sensor 1 or bank 2 ...
Question about 1998 CL
...acura cl Check the fuses and replace any blown fuses. This code is for the heater circuit of the O2 sensor. The heater is powered by a fuse which may have blown if the heater or the sensor wiring was ...
what's code p1156 means? I didn't do not thing yet rich fuel mixture dfetected by oxygen sensor.
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
