Questions & Answers for: abs traction control system 2008

Question about 2007 Uplander LS Minivan

2 Answers

...a sensor in the drivers side wheel bearing...once we replaced it (because it was going out) the ABS and Traction Control warning lights stopped coming on. Need to get ABS looked at as ABS controls ...

Ad

...abs module. ? An internal fault within the yaw rate sensor/lateral accelerometer, P/N 15189628, may be the first possible cause. ? The vehicle stability enhancement system (VSES) electronic brake ...

Ad

traction control system and ABS system both use many of the same sensors to operate. It's possible that you have a wheel speed or other sensor that is supplying an erratic signal to the control system

Question about 2008 Uplander

1 Answer

...traction control messages are flashing and my ABS light is on for my 2008 Uplander. Any suggestions why are 3 are going on? Hello Tip. All three systems rely on some of the same sensors in order to ...

Question about 2008 Uplander

1 Answer

...had the light come on and it turned out to be the abs wiring harnes to the rear wheel had been damaged by a rock. Resodered the wire and the light went out and the traction control system works

...? I have a 2011 Chevy surburban, I just had new tires installed and when I left, the traction control suddenly triggers sporatically. do you think this is abs/ traction control is having this

...at 30 mph. Under that its ok. Can turn the traction control off but that doesnt solve the problem. Any answers? check abs system --speed sensor -brakes possible caliper dragging -or hub worn or ...

abs, stability and traction control light came on. When I turned my car off a motor under the hood close to the windshield on the drivers side stayed on. Is it the ABS control module It's a 2008 Chevy

...traction control is to remove the fuse for it in your fuse panel. if the light is on that is usually a sign that you have a bad abs wheel speed sensor. and it just needs replaced. ...

Question about 2008 Uplander

1 Answer

ABS warning messages also stability system and traction control system Check your wheel speed sensors for proper operation and for metallic debris, make sure your reluctor ring is in working order and

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...