Questions & Answers for: abs sensor tester

ABS IS OK - IS THIS JUST A SENSOR? I had this problem. When they test the ABS with the car not running the ABS was OK. When the take the car for a drive still hook up to the tester, they find that one

Ad

...abs codes. She has a bad wheel sensor or a broken wire to the wheel sensors. Each front wheel has a sensor mounted in the wheel bearing assy. check for a broken wire or a bad sensor. If the light ...

Ad

...ABS Light and Trac-off light on my 2005 Chrysler Town and Country. How do I troubleshoot which wheel sensor is bad? Stop at a Tuffy or other shop and they can scan for codes to tell you which sensor ...

Question about 2001 Grand Prix

4 Answers

...sensor is located in the hub bearing. If you have the car put on a scan tool to pull the abs codes and post them we can go to the next step of the process. One of your wheel speed sensors went bad. ...

Question about 1999 Continental

1 Answer

...sensor is bad or which ABS component is faulty. There is one wheel sensor at each wheel, directly over the exciter ring at each hub. If you want to scan the code yourself, you will need a Ford Super ...

Question about 1990 Legacy

1 Answer

...sensor is bad or which ABS component is faulty. There is one wheel sensor at each wheel, directly over the exciter ring at each hub. If you want to scan the code yourself, you will need a Ford Super ...

Question about 1990 Legacy

1 Answer

...sensor is bad or which ABS component is faulty. There is one wheel sensor at each wheel, directly over the exciter ring at each hub. If you want to scan the code yourself, you will need a Ford Super ...

Question about 1990 Legacy

1 Answer

...abs sensor is detecting a problem somewhere in the ABS system. It may even be the sensor itself that has failed. You can take it to a tech or buy an in-expensive OBDII and test it yourself. It should ...

Question about 2005 Malibu Maxx

2 Answers

...Abs and tc lights are on my son's aztec did that it was a bad sensor on the drivers side brake caliper try checkin there with voltage tester see if u r gettin power to sensor I took my 2006 Chevy ...

...Pls check ABS sensors and cabling of sensors to ABS control unit. Sensor visible damage or cable/connector problem? If none of these, the MUT II tester will tell you where to look Regards ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...