fuel gauge k1500 98 Z71 fuel gauge vibraiting or bouncing k1500 98 Z71 fuel gauge needle vibrating or bouncing gauge failing (dash)
98 chevy k1500 has a hard time changing gears. revs high before change. Speedo dont work and abs light on. TRY CHANGING THE TRANSMISSION FILTER AND FLUID. THIS CAN BE ACHIEVED BY TAKING THE TRANS PAN ...
...indicator light will not go off i just replaced my front pads and roders and checked my fluid levels but my abs light is still on Check the abs sensors. Located on the spindles, by the braking
abs light and parking loight come on abs light and parking light come on Any ABS failure will cause this. Probably a speed sensor issue. You need a scanner to watch data while driving. Not a home fix ...
...98 silverado 1500: anti-lock brakes were engaging just by turning the wheel, I replaced;calipers,flex hoses,wheel cylinders,bled them and pedal still goes to floor. Now what? why did you change the ...
...98 k1500 the front right abs problems i have a 98 k1500 the front right caliper went out and the rear shoes were bad so i changed all of it and bled the brakes now the abs comes on when i press the ...
...K1500 4L60 Transmission having problems shifting speedometer is at Zero no movement and ABS light comes on. The vehicle speed sensor is not working, it is located in the transmission tailshaft. The ...
...K1500 Suburban ..... on hard/firm braking, brake pedal pushes back (like ABS problem) and the pedal becomes difficult to depress. However on gentle/less aggressive braking issue is less apparent. No ...
lound noise in a 98 k1500 I have a 1995 GMC SIERRA 4wd ext. cab shortbox, my 4wd panel on the floor does not light up, and my front two are not locking in, any ideas?
98 chevy k1500. spongy pedal. replaced both rear lines and main line going to the rear brakes. also replaced both calipers, master cylinder and brake booster as these were bad. truck has a 4wal Kelsey
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
