Questions & Answers for: 98 ford windstar engine removal

...ford wndstar 98 To gain access to the fuel pump, it is necessary to remove the fuel tank. Depressurize the fuel system and remove the fuel tank from the vehicle. Remove any dirt that has accumulated ...

98 ford Windstar 3.8L engine with the middle cylinder (Firewall side) failing. it's not burning oil but there is a black soot mixture that sprays out of the tail pipe when I start it up in the morning

...98 need an illustrated diagram on how to remove and replace the speed sensor on a ford windstar 1998 3.8 liter engine. thank you The Vehicle Speed Sensor is located on transaxle, at the rear of the ...

...98 ford windstar 3.8 with a engine miss and two trouble codes, po401 and 402, would a bad EGR valve cause this problem? I replaced the coil pack on my friends wind star when they had a mis. If you ...

...98 ford windstar Are you wanting to discontinue the abs? If so, then keep in mind that you will no longer have abs. The brakes will still function the same without abs. In order to "bypass" the abs ...

how to remove alternator on a 98 windstar 3.8l engine the easyist way is to get a repair manuel from a autoparts store it will give you step by step instructions.in my area they are 15 to 20 dollars

98 ford windstar is displaying trouble codes p1537/p1538, along with a misfire on cylinder 1 & 2 (p0301/p0302). what are some problems that can cause this problem? Codes p1537 and p 1538 are codes

98 Windstar engine was replaced a few months ago with a new reman been having problems stalling at intersection and slow turns. RPM goes down to 500 and less then stalls out. Changed TPS, idle air ...

98 Ford Windstar suddenly won't start and no electric inside -- battery is fully charged. I have a 98 Ford Windstar with a starting problem. It may be more of strickly a battery problem, but I don