...front axle won't engage and 4wd won't work. They are prone to not work in cold conditions as they are thermally actuated. Here is a site for a product that helps eliminate the TLA and the need for ...
...97 z71 with 143000mls on it recently put all new ball joints on it but it still makes a poping noise in the front end what could be the problem thanks idealer arm pitman arm sway bar check cv axles ...
97 chevy k1500 will not engage 4wd When I try to engage the push button 4wd the light flashes for a second, then a loud clunk from under the truck and it immediately reverts to 2Hi Same thing happened
...97 k1500/5.7liter 4x4 would you have to remove the transfer case in order to remove the transmission? The reason I ask is that prior to having a shop rebuild my transmission, my 4 wheel drive engaged ...
Question about 1997 K1500
97 GMC K1500 and have a whining noise almost sounds like a warped rotor. Its not, I have replace rotor, CV axle and now It must be the Axle carrier. I am a fix it myself guy, but this is getting deep.
Question about 1995-1997 Chevy 1500 Truck Ignition Starter Alarm Switch
97 k1500 jerks when turning right at slow speeds When in reverse or just starting out my right tire will **** like the brakes are locked on that side. the tire will squeal a little as if the brakes ...
won't kick into 4 wheel drive light just blinks can hear it trying to kick in The actuator in the front axle will cause this. My 97 K1500 did the same thing, replacing the actuator fixed it.
97 GMC K1500 - When I push the 4x4 button, only the passenger (right) side goes in. Drivers side tries to lock in but only clicks and surges. I replaced the drivers (left) axle and hub/bearing assem.
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
