Questions & Answers for: 97 jeep p1762

...p1762 hi i have jeep grand cherokee year 2000 with check engien light with code p1762 CEL Code P1762 is Governor Pressure Sensor Offset Improper Voltage. Make sure all your wires going to the sensor ...

...p1762 is appearing on my jeep dashborad I have a jeep grand cherokee 2004(six cylinder).Iwanted to replace the old spark plugs(champion RC12LYC) with a new set of spark plugs (ZFR5N- MOPER ). When I ...

p1762, p0303 I have 1999 jeep grand cherokee and the ODb II is giving me codes of p0303 and p1762 and p1763. Looking for a direction to go. I founf one site was telling me that the p1763 and p1762 was

...P1762 Manufac. Contrl. Transmission" I have 2002 Jeep Grand Cherokee with the engine light on. Diagnostics showed p1762 "Manufac. Contrl Transmission" What do I do? Had the same code on my 2002 Jeep ...

...jeep is on, the code reads p1762 i changed the governer pressure sensor and selonoid, and reset the computer, but the engine light comes back on and reads the same code p1762. What else can i do? The ...

...97 jeep grand cherokee Trouble code P1762 means: Governor pressure sensor offset improper voltage.Gov. Pressure Sensor.It is located in the valve body of the transmission and requires dropping the ...

Getting two Codes P1757 and P1762. P1757--Governor pressure above 3 psi in gear with 0 mph P1762--Governor pressure sensor offset volts too low or high

i am noticing a hestitation in the shifting when the check engine light is on. the code is p1762. p1762.

have a 97 jeep chrokee laradoe has codes p1762 governor pressure offset and p1764 governor press too low and the vehicle hesitates and backfires wrong category, try Car & Trucks category

...jeep drives great until it rains... You have worn wire/s. They are inaccessible unless you remove the cross member and drop the transmission as far as it will go down. Then it is still difficult to ...