Questions & Answers for: 97 gmc jimmy transmission reverse

...GMC Jimmy. It has an automatic transmission. When I put it in reverse it acts like it's in neutral. The fluid is topped off. It's acts fine in drive. What could cause this? Burnt band? I'm told and ...

...GMC Jimmy that will not move in Reverse. It does't sound like it's even transferring into Reverse gear when I shift into it. Also noticed a slight whining sound in all Drive gears. I checked the ...

My 1996 GMC Jimmy doesn't reverse but acts like its in neutral. My 1996 GMC Jimmy doesn't reverse but acts like its in neutral and all my other gears work. transmission!!

...is in my 1997 GMC Jimmy SLE 4WD its more than likely a 4L60e Yes  4L60E is what all 97 jimmys came out with.,,   It is a Electronic transmission. Yup 4L60E Just put one in my ...

...gmc jimmi shift solenoid a stuck on reverse not work code p0752 shiift solenoid stuck on No reverse is a dead giveaway of a failed transmission. You must remove it and replace it or rebuild it. P0752 ...

1999 GMC jimmy, 4L60E transmission,won't go forword,but works in reverse 1999 GMC jimmy, 4L60E transmission,won't go forword,but works in reverse Time to rebuild. Mai

97 gmc jimmy loud roaring noise back end My 97 GMC Jimmy started roaring loud when i would hit the gas. It stops as soon as you let off the gas, and only does this going forward, not in reverse. check

...Jimmy transmission to slip in forward gears, but OK in reverse Transmission slips and fails to move vehicle in forward gears. Drives in reverse gear. If your fluid level is right you may have a bad ...

97 GMC Jimmy. I've had the codes read and it says shift selonoid a electrical. So I went ahead and replaced shift selonoid a. But it still is in limp mode! What else can be my problem? Any advice/help

97 GMC Jimmy 4x4 blinkers work, reverse lights work, above window ... I just lost hazard lights and rear brake lights, they were working 2 days ... If it is a frayed wire or solder point, then you can