...97 Ford Ranger 2.3 Manual. The truck would shake hard when I came to an idle. We replaced Motor mounts, Timing belt, Plugs wires, Harmonic Balancer, had it looked at for tranny brackets. It still ...
Question about 1987 Ranger
Ford Ranger 2.0L 4 cyl when you push the gas on the high idle the engine stalls. It seems that it is getting too much fuel. the butterfly valve in the carb is not stuck becasue it can be moved but you
...Ford Ranger 2.0L idle is very high and wont go down I have a 1987 Ford Ranger 2.0L 4 cylinder and the carbretor valve is not moving wiht the choke. You can move it by hand but it keeps moving back to ...
...cylinder is the number 1 cylinder on a 97 2.3 liter 4 cylinder ford ranger THE ONE HEAR THE RADIATOR ( FRONT ONE ) The front engine cylinder / # 1 , 2 , 3 , 4 from front to rear from ford motor ...
...97 2.3 ranger I have changed computers with a 96 explorer due to rap module anti theft. The motor cranks now but does not idle it runs good at a higher rpm. Its got the factory wiring harness for the ...
...97 ranger(2.3)When I use the heat or defrost the engine starts revving up high.It goes back to normal as soon as I turn off the heat. the engine computer is rasing the idle speed when ever the a/c ...
97 ford explorer dies when stoped or idle sometimes it seems to help to put it in nuturel the rpms die down and it bogs out the other day it would not start from a website i found it could of been the
Question about 1997 Ford Ranger Fuel Injection Pressure Regulator
...Oct 17, 2011 - Uploaded by 1A Auto Parts How To Install Replace Broken Tailgate Handle Ford Ranger1993-97 1AAuto. ... This video is applicable to 1993-1997 Ford Ranger
Question about 2006 Ford Ranger - Sport, SuperCab, short bed, with cab high shell - Silverguard Plus Car Cover
Ford Ranger sport that has a missfire and the plugs, wires, and fuel filter has been changed. Still has a misfire, what else could it be? 2006 Ranger 3.0 misfires at idle and has problems accelerating
Question about 2006 Ford Ranger - Sport, SuperCab, short bed, with cab high shell - Silverguard Plus Car Cover
...ford ranger idles really high when it starts. if you take the intake air tube lose it will idle down,miss and die you are stopping the vac process and inter rups vac it does shut down if you remove ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions