Question about 1989 K1500
...Chevy half ton pickup 2 wheel drive 350cubic inch Hi, I replaced the master cylinder, calipers, rotors, pads (front). Bled brakes and have good pedal. Started the engine and the brake pedal is right ...
97 ford e350 brake pedal goes to the floor... i changed the pads in the front drums in the back and blead all the lines i have no leaks at all...still the pedal goes to the floor. the front left wheel
Chevy Suburban K1500 and I hear, what sounds like, a grunting sound when I press the brake pedal (at the half way mark); then the pedal continues to the floor. My truck stops at the grunting sound but
97 Chevy Silverado Brake Problem I have a 1997 Chevy Silverado 1500 Z71. My wheel cylinder went bad so I replaced it. Still my brake pedal fell to the floor. So I then replaced my master cylinder did ...
...chevy k1500 is having brake probs. Pedal goes half way to the floor before beginning to engage, and then takes lots of pressure to actually stop. Could this be the brake booster or is it more likely ...
brake pedal goes to floor but you can pump it up on a 98 chevy 1/2 ton could it be something else besides the master cylinder because after its pumped up the pedal will hold steady and not creep to ...
97 siverado brake pedal goes to floor and theres no air in line no leak new master went motor its not running brakes feel ok as soon as i start engine pedal goes down Does your truck have ABS? If so ...
chevy k1500 pedal goes all the way down Brakes are hydraulic. pedal going right to the floor indicates either brake fluid is too low and air got in the system, or your master cylinder is defective. if
Question about 1997 K1500
97 chevy suburban k1500 brake lights work when barely touched then go off when pressed harder 97 chevy suburban k1500 brake lights work when pedal is barely touched then go off when pedal is pressed ...
Question about 1997 K1500
97 Chevy Lumina. But, when I go to test the brakes they don't seem to be working right. The pedal goes all the way to the floor. Did you replace the wheel cylinders? If so, you probably got air in the
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions