...Toyota Corolla - Valve COver Gasket Replacement Do I am replacing the valve cover gasket on my 1994 Toyota corolla. Do I have to torque it down once it is replaced? You need an aftermarket serviice ...
torque for head bolts for 1984 Toyota Corolla Hi I need to know the torque specs for 1984 Toyota Corolla head bolt toque specs are 40-47 ft-lbs for sr5 43, for 4age,44
...specs for 2003 toyota corolla Toyota do not have a specific torque setting for spark plugs in the master workshop manual,they say "hand tight, plus 1/8th turn"(using a plug socket and ratchet
on 1998 Toyota corolla. i don't know offhand but to be official around 14lbs. These are only little bolts, so a 3/8th rachet and two fingers about halfway down the handle will be the right torque
Question about 2002 Sienna
...toyota sienna's spark plugs, air intake manifold, and valve covers? Thank you. Need torque specs for 2002 sienna ce van's; spark plugs, air intake manifold (upper), and the valve covers. Thank you. ...
Question about 1989 Corolla 2 Door
...Toyota Corolla I don't have the figure you need on file but i seem to remember the bolts are 6 mm, though it has been a while since I saw one of those cars. Valve or cam cover bolts aren't usually ...
Question about 1989 Corolla 2 Door
...connecting rod and main bearing caps for a 1995 Toyota t100 dx 3.4. Check these links Repair Guides Specifications Torque Specifications AutoZone com torque specs 1995 Toyota t100 dx 3 4 Google ...
Question about 1989 Corolla 2 Door
...Toyota Corolla DX 1.8L? I replaced it recently and wasn't sure if I tighten it in all the way, cause there's threads that are still visible. And the oil light still flickers or stays on when the car ...
Question about 1990 Corolla
...Toyota Corolla 1.6 cylinder head bolt tightening sequence and torque specs please? All in this link ...
Question about 2002 Land Cruiser
...toyota-specs.com > cars > cruiser4.7 > torque-spe... Valve Covers Installation The valve cover bolts torque down to 106 in-lbs or about 9 ft-lbs in a criss cross order. Be sure not to miss any bolts ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions