...94 2.5L Vigor 1986-89 2.7L Legend 1990 2.7L Legend 1991-95 3.0L NSX 1991-95 3.2L Legend AUDI 1970-93 All Except 1970-77 1.9L & 1970-73 1.8L BMW 1987-95 2.5L 325I 525I 1994-95 4.0L 740I CHRYSLER ...
...94 2.3L Ford Ranger broke, I have replaced but don't know how to set tming The timiing is set by aliging the timing marks on the cam with the timing marks on the crank -- then the belt goes on. ...
...94 ford ranger? I can't find a reference point on the crankshaft gear for the timing belt, my truck will start, but the timing is severely off. HELP! Put the harmonic damper back on with the timing ...
...94 ford ranger 2.3 My apologies for the delayed response. I am going back to answer unanswered questions. CLICK on the following LINK. It has the Timing Belt & Mark(s) Diagrams you will need. If ...
...94 and 95 ranger had a 2.3L. If not done: Loosen tensioner adjusting bolt. Using Camshaft Belt Tension Adjusting Tool T74P-6254-A, pry tensioner clockwise against spring tension as far as possible. ...
...94 ranger and have had to replace the tensioner 2 times Does this model have a distributor or is it DIS with coil packs? if it does have a distributor, you may have to set the ignition timing. It is ...
94 ranger timing belt broke. set all timing marks installed belt no start rechecked all lined up good spark compression. fire but sound like out of time rechecked all marks line up help please. engine
Question about 1994 Ranger Supercab
...94 ford ranger 4 cyclinder 2.3 5 speed need to know how to set timing on a ford ranger 94 Here you are Tina,click on link to ...
Question about 1994 Ranger Supercab
...94 ford ranger everytime set marks and release tensorer in moves marks Four cylinder? Sounds like you have to much slack on the non tensioner side of the belt. The belt should be tight between the ...
Question about 1994 Ranger Supercab
...94 ford ranger lt pickup put on new head gasket and now it want start up motor just turns should the crank mark be pointing up and the cam mark pointing down or do they both point upward On the 4 cyl ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions