Questions & Answers for: 93 ford probe 4 cylinder

93 ford probe What freon do i use for a 1993 ford probe GT 6 cylinder. 134, 12, etc? 1993 is a split year, if you have charging ports are a little bigger than the size of a tire valve stem then u have

Ad

Question about 1993 Probe

1 Answer

...ford probe gt, v-6 3.0 engine for the 1993 probe i could only find a 2.5 V6. there are two banks of cylinders, odd and even. in other words as you stand in front of the vehicle the odd bank is toward ...

Ad

93 ford probe - starter ground wire 93 ford probe with the 2.0L starter ground wire gets hot when key is in the ignition or cranking possition. just did a motor swap because the old one ran out of oil

...93 Ford Probe (4 cylinder) and want to remove the power steering pump. Where can I find diagrams on removal of the pump? Haynes repair manual #61042. I bought one for mine and it covers everything. ...

...ford probe with two cylinders dead one on each side. i do get spark, fuel, and compression. but i dont get fuel in the cylinder but the injectors are not clogged. Check the pulse on the two ...

where is the transmission fluid dipstick in my 93 ford probe? you may not have one it could be a sealed transmission 93 ford probe tranny dip stick is on the driver side below the master cylinder

...93 ford probe gt and i I'm installing a turbo on a 93 ford probe gt and i want to know if i have to cut anything ran it without oil stoped shut it off now it wont start it cranks all day but dont ...

93 probe gt. After putting everything back togeather it wouldn't fire. After playing with the dist it fired for about 5 sec. then it almost seemed like it ran out of gas, Fuel cut off light was on, no

...93 probe gt 2.5L, I went to do something else and forgot the order they need to go. standing at the nose of the car what is the order starting on the firewall side from left to right , than at the ...

looking for the firing order on a 93 ford probe 2.5 on the cap FIRING ORDER FOR ENGINES 2.0L 2.2L IS 1 3 4 2 FIRING ORDER FOR ENGINE 2.5L IS 1 2 3 4 5 6 FOR THE 3.0L ENGINE FIRING ORDER IS 1 4 2 5 3 6

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...