92 gmc sierra? do i need to disconnect the battery first? my bearings went and the thing was screaming. Yes, disconnect the battery. Remove the belt. Disconnect the wire leads from the rear of the alt
Question about 1992 Sierra K1500
...is connected to my 92 gmc truck it turns over when battery is connected to my 92 gmc truck it imediatly starts turning over without turning key New switch. This happened to me before. New
...92 GMC Sierra K2500 only wants to make a grinding sound when i turn the key. it does not want to even attempt to turn over. can anybody help me solve this? could this have something to do with the ...
...92 gmc sierra but i dont know if i have to use only the same year transmition or i can use another year Most gmc transmissions were used on several year models. the main thing you want to do is match ...
...gmc sierra 4.3 pickup will not start after it rains like i get no spark. after a day or two then it starts. is this a common problem with this model. thanks I have this problem with my 92 pontiac ...
...92 GMC Sierra 1500, I need to know where the relay switch is for the fuel pump.. Any help would be greatly appreciated Thanks the Fuel Pump relay and fuse is under the plastic cover under the hood at ...
Question about 1992 Sierra
92 gmc sierra k1500: changed key ignition, starter and solenoid fine, all connections to battery fine. Still won't start. Think it's the ignition switch or relay on the steering column. Wh 92 ...
Question about 1992 Sierra
...92 GMC Sierra 5.7l and it barely runs and the tachometer is all over the place. I have a 92 GMC Sierra 5.7l and it barely runs and the tachometer bounces all over the place. I never have seen the ...
Question about 1992 Sierra K1500
92 GMC K1500 SIERRA 4.3 L V-6 I am just wanting to fix my oil pressure guage and was told to change the sending unit by distributor...do i have to pull the distributor? Not with the right tools by the
92 gmc sierra k1500 ignition switch the key switch or the actual switch ? do you mean the key? for the key u must dismantle the column. for the switch u must lower the column by removing the two bolts
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions