Questions & Answers for: 91 s10 ignition

...91 S10. Now the ignition switch buzzer will activate by wiggling the lock set w/or w/o the key in switch. Also key seems hard to remove. I believe problem is in mechanism between starter switch and ...

...91 s10 blazer, every once in a while the starter will just continue to spin after i turn it on, even after i turn the key back off. I have replaced the ignition switch, and the starter, the problem ...

...91 s10, 4.3L 4x4. When I turn ignition key, the starter does not engage. No noise, no clicking.... nothing. Lights, radio and all other accessories work fine. Where should I start? It has a new ...

91 chevt s10, every thing works but it will not engae the starter, you turn the key and nothing, every thing else works! does trcuk have anti theft? He may need to transfer his ignition switch and key

...s10 that i had to replace the ignition control module, was wondering if a bad voltage regulator might have caused the ICM to fail!!!! could failure of the voltage regulator cause the ICM to break. I ...

...91 chevy s10 2.8 v6 and I'm trying to I have a 91 chevy s10 2.8 v6 and I'm trying to time the ignition but it won't stay timed ill line up the timing marks and after a couple minutes it ...

how do i bypass computer in 91 s10 blazer Well you need the computer to power the ignition and fuel injectors. What are you trying to accomplish ?

91 s10 4.3.... When tring to give full trotle it bogs down...rebuilt tbi,change filter..all tune up parts...help me someone 4.3 liter I have a 99 tahoe that will accerlerate very slowy, procrastinate ...

91 Chevy s10 fuel reaching fuel injectors but won't start? well if you're getting fuel the next step is to work at the ignition system.that would be the ignition module or the and ignition coils.the ...

...91 s10 4x4 4.3 turns over no start has spark good fuel presure but no fuel coming out of injectors pore case down carb.wants to run. Had bad i.c.m. but replaced with good one .and new computer If ...