...885. The last few days, I can neither send or receive faxes. I am getting an error code OPT-3. Any suggestions? I get a dialtone when I hit the monitor button and have checked that the phone line is ...
...885 I can send a fax out but I cannot receive a confirmation report or receive faxes because of error code #007 (paper jam). What can I do? paper jam error codes rely on input from sensors in the ...
...885 will not print The machine will send and recieve faxes but just puts out blank paper. I changed toner and that did not help. I cleaned and did everything I could think of. Any suggestions? You ...
...paper, the jam clears and it happens all over again, and again, and again. What can I do? Carol Wood You have a bad job stuck in memory. Press function 7 monitor slowly 4 times * 6 scroll down to ALL ...
Question about Panafax UF-885 Plain Paper Laser Fax
Describe your panasonic kx-fhd331 reprint fax Problem. Paper jammed during receipt, but I could hear the fax machine still "printing" on nothing. Is there a way to reprint the fax or is it gone from ...
Question about Panafax UF-885 Plain Paper Laser Fax
...paper jam. Manual does not have this code. HELP! Press Function 7 monitor key slowly 4 times * 6 scroll sdown to SHIPMENT SET set 2 wait for the machine to initialize Hello Have a look at the link ...
Question about MFC-845CW multi-function All-In-One InkJet Printer
...885 that shows paper jam although all paper has been removed What do I do please? Common problem. Open the back door and check the sensor flag and make sure it flips back and forth freely. Check the ...
Question about Panafax UF-885 Plain Paper Laser Fax
Paper jams as its feeding from the tray into the machine Start with the paper itself. Make sure it is in the machine properly. Here is a short guide on a few things to check: ...
Question about IntelliFAX 885MC Plain Paper Thermal transfer Fax
...885-now paper and fil jam I changed the film in my brother 885 and now I can't receive faxes--the paper and film seem to jam together--any ideas? 2 reasons. 1.You have not installed the film in ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions