Questions & Answers for: 70 series washer springs

70 Series Washer My washer recently has not been spinning all of the water out of the clothes. I took some of the clothes out and put it in for a second spin and the drum would not move. I had to have

...70 series My washer is leaking. I want to get the back off to see where the leak is coming from. After I loosen the back it doesn't want to lift off. What else do I need to do? the back does not come ...

...70 Series top load washer makes noise during spin cycle When you open the top, the tub looks slightly off center (you can pull it back to center)and now each load makes an off balance noise when it ...

70 series washer wobbles very badly. My washer has started to wobble itself to death! Feet are level and locked, but the tub seems to be banging into the sides of the machine like a support has broken

...70 series I am having trouble replacing my belt on my washer. Is there a step by step solution? My washer is older but is good. Kenmore 70 series 82372810 i've got them down to 10 minutes, but here ...

Series 70 Washer that wont spin I have model #110.26742500 Series 70 Washer. Trying to remove the console, to look at what I believe is a drive coupler problem. Can not get it off this one is a little

...70 series, two speed automotic washer. hi, thats a 35 year old washer. we had one for years. the springs have lost their tension. youll have to run smaller loads, you can try sears parts direct for ...

...70 series washer. Lots of vibration when spinning yet the tub really doesn't appear to be out of balance. (I held the switch closed with the lid open). Also we are getting some leakage, minor, during ...

...70 series washer quit agitating and spinning today. what could it be? i think you will find the belt at the bottom has broken or come of here are the directions to replaced / re fit it best of luck ...

...70 series washer making knocking noise when spinning. It washes the clothes fine but it just started making these horrible knocking noises when it spins and agitates. I tried holding the agitator ...