Questions & Answers for: 700r4 will not shift

Question about 1994 K1500

2 Answers

700R4 while looking close to the same does not relie on your ecm for commands,it relies on a cable to regulate your line pressure. i have a 99 suburban and it is slipping trying to go into 3rd and won

Ad

700r4 tranny 4 wheel drive,tranny shifts fine when cold rough shift when warmed up or wont shift at all, ive changed the fluid and filter, any suggestions? try some transmedic .put a little in tranny

Ad

...700R4 to shift the way it should?? thankyou The 700R4 is controlled by vacuum lines and throttle cable kick down linkage (TV) and need to be re calibrated to the engine as to being 4.3 or 5.0 to 5.7. ...

...700R4 TRANS shift fine 1 and 2 shifts to thrid neutrals out and back to second . step on it and force shift to 3rd and 4 .. vechicle sat for a year .. any help or a rebuild ?? get it serviced as the ...

...700R4 in the 1990's. Be bad for a Corvette to shift like Grandma's Cadillac going to play dingo. Good luck and hope this helps. You can find information like this pretty easily on the manufacturers ...

700r4 is not electronic shift and you have no connection for the shift cable. And if you get a electronic 700r4 (4L60E) The plugs are completely different and you would need to change the whole engine

Question about 1997 Sierra K2500

1 Answer

...700r4 tranny rebuilt again! The guy I purchased my truck from just had it rebuilt 3 yrs ago. It had a hard second shift and he told me that was from the shift kit they put in it. Well, that hard ...

Question about 4L60E/700R4 Transmission Pan 82-97 Chevy & GMC Truck /

1 Answer

overfilled transmission in 700r4 transmission overfill problems Overfilling can cause foaming which results in poor engagement and shifting. Harbor Freight has a nice little suction pump for $6 that ...

Question about 4L60E/700R4 Transmission Pan 82-97 Chevy & GMC Truck /

1 Answer

shift sylanoides You have no doubt eliminated wrong fluid levels as a cause since your are changing out the solenoids. I would suspect low fluid pressure either due to a failing pump or obstruction in

Question about 1988 Corvette

2 Answers

...has a low fluid level and refill it as soon as possible. Don't listen to Bean. You have a 700R4 transmission. hard shifts could be the governor. Unlikely. I have an 88 trans am with the

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...