Questions & Answers for: reasons poor solder

...post.. no convergence on a hd52w59? no convergence option in setup?...fl231 a small fuse next to flyback being blown causes this. The reason this blowns is poor solder connections on the ...

...reasons as to why it is doing this ,poor solder connections bad ribbon or ribbon connector or SSB board ,i would start with soldering deflection board alot of these sets have poor connection on ...

...TURN ON FOR AWHILE? MY TV TURNS OFF BY ITSELF AND WON'T TURN ON FOR AWHILE? There is 2 reasons for this poor solder on power AC board and a capacitor going bad. cap when failing will puff up on

...POOR quality solder joint on a printed circuit board on the lead of a power transistor in the CCFL inverter circuit. Go to YOUTUBE and learn how other's have learned to deal with poor quality ...

My Screen will go blank, after it has sat for a while it will come back. What is the most common reason for this? Hitachi 51f59 51 inch Poor solder connections on power supply board.

...poor solder joint or a heat sensitive transistor. I would look for the poor solder joint first. Look around the driver transistors and the voltage regulators. Those two ares are the most likely to ...

...poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and ...

...solder joint. This will require opening the laptop and soldering it again. A very tedious and delicate job. The reason why it will only charge when it is off is because of poor connection, but when ...

poor convergence sometimes not adjustable bad solder connections at bottom of flyback transformer are most common reason.

...reasons: bad board that drives the right side of the screen, loose or poor connections in that area including plugs or solder connections and worst possible is a physical problem with the screen unit ...