Questions & Answers for: pin volume control connection

...Volume Control broken! The pin connector (the part that plugs into the subwoofer) on the end of the wire for the wired remote has broken off, and I don't know which color wire goes to which pin! Can ...

...pin. provided you connect ground of both cables which goes inside the volume controller.. it works for me.. you may experiment as i did... 1.connect 1st and 4th terminals of the pot counted from the ...

...volume control knob or incorrect/missing drivers. You can download the drivers for this product from a company called Mecer: ...

...volume gets totally wiped out. Try these fixes 1,reinstall sound drivers from cd, update drivers from web. 2,check you have connected audio pin(a green pin from external speacker) connected to green ...

volume knob is switched on. The multi pin lead that goes into the rear of SW isn't the cleanest fit. Had some problems with a bent pin before. Creative have stopped all support for this model. Any

volume control hookled up via hdmi and analog and either way still no volume control. get sound but very loud. adjusted volume input on my Vizio tv and still no volume control. How to fix? you need to

...volume down operation by using the remote control (if available), if it works then your problem lies with the switch or a broken connection between the switch pins and the face control circuit. ...

...volume control adjusts one speaker only the other is at a set and quite loud volume which means I have to have both speakers at a high volume to get any balance. Many amps these days have an IC that ...

...volume control itself is defective. If the ground connection to the control opens, then the audio will do this. The repair usually is just a re-solder to the ground pin, or replacement of the

...pin 3) should run from the connector through the volume control, to each ear piece. The mic/volume wire should terminate at that control. although it could connect to more than one place within the ...