...is a purpose made plug behind the panel on the drivers side rear, behind the rear lamp i think the relay you have bought is for lamp failure you just need a normal 4 pin 30 amp relay. Good luck ...
relay.pin 30 is either a power or a ground depending what you want switched.when the relay is activeated pin 87 becomes the same as pin 30.pin 87a is rarely used but it will be the same as pin 30 only
diagram, the coil graphic is for the control side, and the broken, angled line with an arrow is the power side. Whatever you do, do not keep voltage on the relay for very long, and if it starts to get
......
...pin is power to the relay magnet, the other is ground for the magnet. The magnet closes a switch which is power for the headlights and the wire to the headlight fuses.You would jumper the ...
relay switches the heavy current required to the h/lamps. This means 1 pin is from the switch and 1 from fuse box (usually) this is where a diagram is gold. If you have a live pin that responds to the
Question about 2000 Blazer
...pin 87 at the relay socket ! Probably a bad fuse or stuck relay . Pull that relay and try a different one. You can get wiring diagram at www.bbbind.com click on technical information ,then click on ...
...relay socket ? pin 30 an pin 85 . Pin 85 comes from the park neutral switch . Jump pins 30 to 87 an see it cranks . On the side of the relay is a diagram of the pins ! VEHICLE RELAYS Operation ...
Question about 2002 Explorer
...pin 30 on a normal relay) ready to switch on over to the A/C clutch terminal (Normally pin 87). The problem Im having is no power is going through the relay pins that have the coil (normally pins 85 ...
Pin Fuse Box/Block Circuit Breaker Diagram ; 1, Relay Heater ; 2, Relay Heater ; 3, (Headlamp) Relay Light ; 4, Relay Engine Oil. Fuse Box Diagram Toyota Fuse Box Diagrams https://fuse-box.info > Home
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions