...Super Duty. Auto locking hubs won't engage so I tried switching manually into 4 wheel and it still doesn't work. I had my front u joints replaced at a local shop and a month later when I tried my 4 ...
...Super Duty and I am having 4 wheel drive problems, am going to list everything that has happened so I can hopefully get help with this. 1. About 3 weeks ago I had to use the 4 wheel drive one morning ...
front of the vehicle? I don't use 4wd much and don't want to chew up the hubs Here is an easy way to tell if and when they are not engaged. Look on the inside of the axle knuckle where you see the the
...4wd ck fuses,make sure veh. is in nutreal and make sure front diff.is not binding my for f250 is a 2003.and it did the samething.my deler toll me to turn the lock off and on 15 time to relese the ...
Question about 2002 F250 Super Duty SuperCab
...front hubs that drive shaft woulld not turn freely ...still as though in locked position.......... i'm not in 4WD that often...but when i locked hubs that right hub was difficult to turn....would not ...
...4wd, 7.3 psd. noticed today while rotating to tires. drive shaft going to front passenger tire has play (approx 1/8" up, down, front to back) where the drive shaft comes out of the axle sleeve and ...
...4wd hi and then back to 2wd and vibration goes away for awhile. hubs are unlocked. when hubs are locked, don't have the vibration. looking for a diagram of the front axle assembly to correct the ...
i have a 2000 f250 powerstroke when i put it in 4wd there is a clicking sound coming from the front right wheel. could it be a u joint? locking hub has probably came apart.
Question about 2003 F350 Super Duty DRW SuperCab
...front end grinding and rumbling ?? rotor was checked out and was ok, almost sounded like 4 wheel drive was trying to engage in 2wd causing grinding and rumbling, I put it into 4 high and it went away ...
...4wd super duty with manual hubs last night. No owners manual. Which way do i turn the hubs to lock them? No markings on the hubs themselves. A easy way to check and see would be to lift the truck up ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions