Questions & Answers for: 4l80e 1st gear

4l80E tranny 1st and reverse only truck only has 1st gear and reverse the service engine soon light is on want to be on the right direction b4 i spend the money to rebuild oh the tranny fluid has been

...1st gear when lifting the accelerator, shifts into other gears ok, when you try to go into passing gear it goes into neutral when lifting accelerator ot goes back into gear, is this a speed sensor or ...

...is probably bad. 1997 MH 454 vortec 4L80E trans. Coming up hill an lost first ,got it movin an got to gas station an no rev. Once moving 2nd an up are working,just no 1st or Rev. Any help,,Thank

1991 chev C3500 4L80E transm. won`nt shift out of 1st gear try some bar nones trans stop slip

4l80e transmission will not up shift after rebuild will not shift out of 1st gear it has reverse the internal selinoid has gone bad in the transmission may have caused damage internally in the gears ...

...1st) it does nothing, after that position it falls in correctly (2nd position is first gear, etc) until I hit reverse. In reverse (remember I'm thinking it should be neutral) it still pulls forward. ...

...4l80e transmission in my 95 gmc sierra k3500 1ton and the output speed sensor isnt plugged in and i cant find wiring for it.could this be the reason of why it shifts out of 1st gear hard and at high ...

...1st and 2nd gear. Any help would be appreciated. 4L80E or 4L80? If its not an E there is a cable called a tv cable that may be out of adjustment. That will destroy a trans in a matter of few

...4l80e trans with a ez shift controller it was working fine and one day i was driving in o.d all of a sudden it went to nutereal tried 3 didnt go tried 2 gear it took gear now when pulling out it dont ...

...4L80E / 4L85-E or 4L60-E / 4L65-E 1st Gear Range Only - No Upshift Checks Causes Control Valve Body (60) • The 1-2 Shift valve is sticking • The spacer plate or gaskets are mispositioned or damaged ...