Questions & Answers for: stroke engine blowing white smoke

...stroke of one of the pistons. A mechanic friend of mine says that the engine is not worth trying to repair and that these engines are notorious for this type of problem! He said that it could be the ...

...stroke? This is a verticle shaft engine and the oil return from the overhead valves is in this area. Does this sound like I am right. I don't want to have to do a rebuild. I also have a John Deere ...

...and what oil goes in the crank case thanks. I see this is for an RT vehicle -- the post indicated it was a motorcycle. But, here's an oil recommendation for the engine :: AMSOIL 0W-40 4-Stroke ...

...stroke engine.If you dont, you can have all kinds of problems. My 2003 rm was smoking the same as yours and it was my crank shaft seal on the clutch side i replaced tht and it stoped the problem i ...

stroke is a bit more involved. Incidentally I doubt if the engine has NO piston rings. But they may be worn or broken. And in either case the bits from them are in the crankcase somewhere, this is not

...stroke turbo diesel blows white smoke runs little bitt then dies will start after it cools off is it smoke or steam. check the coolant the engine could be burning coolant caused by a ruptured head ...

...engine. It died with motor smoking white and won't turn over or do nothing at all white smoke usually indicates excess oil consumption. make sure you can turn motor over by hand you should feel ...

WMAT CAUSES WHITE SMOKE FROM EXHAUST DOESNT BLOW SMOKE ON IDLE ONLY A PUFF WHEN YOU REV IT IS IT A BOTTOM END SEAL? Need to know 2 or 4 stroke and would also help to know what engine it is etc.

...it is a four stroke engine it will take either 10w-30 (mostly) or 10w-40. Here is a web address for a manual. ...

engine as it is oil I take it that it was a synthetic 2 stroke oil that you used incorrectly best if you drain it out and refill with the correct oil for the engine as for the white smoke , that could