Dodge 440 engine in a motor home. I made a stop and when I restarted the egine it races at high spee. I checked all the linkages etc and lubed them, even turned out the idle screws but it does not slw
...440 dollars and so far I could not find one. I would rather put in a timer myself; but I need a wiring diagram. does any one know where I can find one? Thank you Gunnar Gunnar, Go to Alldatadiy.com. ...
...dodge 440 in a motorhome and the engine turns over but as soon as I let off the starter it dies. It seems like its not getting power to the engine? It could be many things so start with the easiest ...
...440 engine with 35,000 miles and a fresh tune up last year. Runs great but as I was winterizing this year, and letting it warm up, it shut off with no indication of lack of fuel, ie no "buck and ...
Question about 1978 Magnum
...Dodge Model: Ramcharger Year: 1987 Engine: V8 Vin#3B4GW12W2HM709829 The ignition switch has two positions inside the switch. There is an ignition feed when the ignition is in the crank position ...
...Dodge 8 cyl engines. And the odd cylinders are on the driver side. The small block engines ( 318 ) have the distributor in the back, and the big block engines ( 360 440 ) are in the front. The rotor ...
Dodge with a 440. It's a 1980 yr. & it has a Edelbrock (fact. replacement carb) My problem is the 2 screws for adjusting (front by intake ) air/fuel will screw in & out all the way & nothing changes!!
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions