Questions & Answers for: 322 acquiring signal

...322 receiver is working. I can only acquire signal to one TV. Make sure u use the other remote to turn it on. Check your LNBF for signal. Make sure your blue light is on, on the receiver itself. You ...

322 rec. box that has been replaced once. You can watch one TV at a time but you can't watch both at the same time. The one that does not work says acquiring satellite signal. The old box did the same

...back of the 322 box is bad. usaly 1 wire runs from the dish into a seperator that splits the signal into 2 at the back of the box. you will need to call dish and have a new 322 sent out. ...

...Acquiring Satellite Signal?. http://tech.dishnetwork.com/departmental_content/TechPortal/index.shtml rnw1251 Any time you have a black screen, no audio but you are able to bring up the program guide, ...

acquiring signal when I turn it on and it places and X on one of the satellites names and sits there. I have a dual lnb which picks up 110 and 119. When I go to the signal quality it shows only on one

322 receiver trying to acquire a sat signal for 5 days 0 out of 5 progress please help Hi, Mary with Dish network Customer Service. The issue you are experiencing is a complete satellite signal loss ...

322 duel tunner reciver it ask for telephone line connection and i can't connect tel line, is their a way to bit This is Mary with Dish Network Customer Service. The message you are referring to is an

...322 will play in one room, but 2nd room it continues to try to acquire a satellite Hey there, my name is Cheri Torres with DISH Networkcustomer service. I came across your post and wanted to see if I ...

...322 receiver. Everything was fine; a week or so ago satellite 119 reception was spotty, now we can't get 119 at all. We get 110 but only about 34%. Sometimes the receiver will power itself off and ...

I disconected my receiver when connecting back did not work never acquire signal The satellite in cables play a big role in a receiver getting signal. Since they were disconnected, verify the cables ...