Questions & Answers for: 302 ignition timing

Question about 1989 F 150

1 Answer

ignition timing and RPM for the timing for my 1989 Ford F-150 4X4 with a 302 EFI. There is no engine sticker on the vehicle. Thanks, Dave Initial Timing 10 degrees before top dead center NOTE: Initial

Ad

302 engine. harness was hacked in by previous owner and the alternator doesn't charge, and the ignition doesn't ork right. Thanks. http://www.veryuseful.com/mustang/tech/engine/ hi my 95 cobra svt has

Ad

...302 V8 5.0 engine. CLICK HERE for a larger version of the first picture. Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question. Hi,welcome to fix ya. the ignition ...

...ignition in the column they usually have a fusable link since the 302 is harder to turn over than the inline six you probably just blew that fuse or burnt the wire the easiest way to check it is ...

...2 know the timing on a 1989 ford 302 motor is and also timing on a 1989 ford 351 w is thank you with the shorting plug removed at the TFI ignition module the timing is set to 10 BTDC on both

...302 V8 What is the timing spec? The decal on my valve cover is not ledgable. 10 degrees BTDC What type of emission system? does it have california emissions? or federal? Since it's a 1972 I am ...

...302 startes fine back idels fine. put it in gear to take off it starts backfireing when giving it gas engine can be out of time low fuel pressure or can be a burn valve need to check ignition timing ...

...302 304 305 306 (all cylinders missfire ) then i changed the distributor cap rotor and ignition coil still is misfireing what else could it be ? if you are certain that the wires have been replaced ...

Question about 1996 Grand Cherokee

2 Answers

...302, 390, 428, 429 are the same. Spark Plug Type: BF32 Spark Plug Gap: .034 In. - .035 In. Ignition Point Dwell Angle: 27 Degrees Ignition Point Gap: .021 In. Ignition Timing: 6 Degrees Before Top ...

Question about 1996 Grand Cherokee

2 Answers

...302 is cylinder #2 misfire and 303 cylinder 3 misfire. Most common causes are ignition issues. Spark plugs, ignition wires/boots and ignition coils. Next would be fuel issues such as fuel injectors. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...