Questions & Answers for: stoke oil chainsaw

...stoke there isn't much to tune up. the MOST IMPORTANT THING TO REMEMBER IN A 2 STROKE IS GAS AND OIL MIXTURE,too much oil will foul plug no big deal. replace plug. too little oil in gas will wash the ...

...chainsaw starts but cuts out after a few seconds Initially it would start somewhat reluctantly but after a few minutes would start to loose power and then cut out. It would start again after a few ...

...is bad in carb get a carb kit and rebuild it and check the fuel line from carb to to the filter in tank and if that is a two stoke eng with oil in gas do not run on ether will most likely burn up ...

...stoke oil. All two stroke engine will use a 50 to 1 ratio using today's two stroke oils, Best bet would be to find your manual online: http://www.husqvarna.com/us/homeowner/support/download-manuals/ ...

stoke oil mixed with petrol regards You mix 2-cycle oil with fuel you add to the fuel tank. Use "Bar and Chain" oil (home centers and hardwares, what ever is least expensive) in the oil reservoir. HTH

...stoke what is the mix of oil to petrol ? Thanks that Poulan saw is 2-stroke and needs a fuel oil mix ( 2-stroke oil ) at a ratio of 40:1. c... I am not familiar with the model No. but most chainsaws ...

stoke oil it is mixed at 50-1 if you are useing anybody elses oil it should be mixed at 25-1 as we do not know the quaility of other peoples oil, avoid oils from super markets and mass traders, always

...in my husqvarna 16" chain saw? Unleaded fuel with Husqvarna two stoke oil mixed at 50-1, for the chain you need a non fling chain oil, both should be available from your local Husqvarna

how 2 mix stroke fuel for rolux lawn mower ratio FIRST TIME USER use the baby jug of 2 stoke oil the sell at your local mower shop, it will treat one gallon.

...stoke oil to 5 liters of petrol/fuel/gas.....(5000ml divided by 200ml= 25) most 2 stoke oil is able to run at 50: 1 mix ...instuctions on what oil ratio should be used are always displayed on the oil ...