Question about G 2600 VH Gas Pressure Washer
what viscosity oil is recomended for oil change? Gasoline-powered pressure washers use an SAE 30W motor oil (10W-30) in the engine. Always consult the engine manual for specific instructions and be ...
pressure cuts in and out won't stay at full pressure See attached link
Question about G 2600 VH Gas Pressure Washer
...few years, so not bad. Joebro Check the tips and Videos at ...
Question about G 2600 VH Gas Pressure Washer
g2600vhr less than 20 hrs. Pressure dropped 2/3. Was told valve stuck from minerals. How do I get to valve to lube them? Can I download a pump manual? Thanks Does this help? ...
how do I change the oil I assume you are talking about the pump. Not good, remove pump, disassemble and oil falls out. Put in new oil upside down and reassemble pump, then reinstall.
Water will not come out of sprayer either the checkvalves closed on the inlet or the chemical injector on the output may be clogged they will have to be removed for inspection.
milky engine oil suspect water in oil... just change the oil and see if it returns. it's very rare that a pressure pump can get water into the engine
Question about G 2600 VH Gas Pressure Washer
How do I fix a Karcher 2600 PSI pressure washer has water in oil.. Replaced water input casing and now we have water in oil. you mean water in the pump oil ??? or engine oil ??? im suspecting pump oil
Question about G 2600 VH 2600 PSI 2.3 GPM 161cc Honda Gcv160 Gas Powered
grey oil leak and no water pessure depends on where the oil leaks from , normally a cloudy or "grey" oil sheen ,oozing out from here and there doesnt consern me too much , but now the oil running from
Question about G 2600 VH 2600 PSI 2.3 GPM 161cc Honda Gcv160 Gas Powered
Power washer won't start Karcher g 2600 vh wont start Does it have spark? Is it getting fuel to the cylinders?
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions