Questions & Answers for: 25 fuel mix

...Fuel mix is 25:1 - especially now that we only have unleaded... best to use BP Ultra 98 octane as these saws were designed to run on Super leaded fuel. I used to own a 797 Super (123cc motor) Terry ...

...fuel mix is 25:1 but most homelites run a mix of 32:1 either one should be ok FUELING AND REFUELING THE TRIMMER FUEL MIXTURE This product is powered by a 2-cycle engine and requires pre-mixing ...

...oil mix. The fuel tank cap should indicate by symbols or words the fuel requirements. If unsure call your local agent or chain saw retailer. The standard Fuel / Oil mix for most two strokes is 25 : ...

...25-1 fuel oil mix as they do not know the quaility of other manufacturers oil, always try to use Husqvarna oil. what is the precent of oil ( litter ) to mixed with one litter of ...

...whats the correct mixture of fuel For two stroke engines of this capacity the ratio of fuel to two stroke oil is (25:1) 25 fuel to 1 (two stroke) oil. Eg 200 ml of two stroke oil to 5 litres of

...fuel/gas.....(5000ml divided by 200ml= 25) most 2 stoke oil is able to run at 50: 1 mix ...instuctions on what oil ratio should be used are always displayed on the oil bottle you buy for aircooled 2 ...

1 mix,and fill it up That the very reasoning is why I get so many units in with struck rings and heavy carbon buildup. 3.2 oz of 2 cycle fuel oil is 40 to 1 mix. A 25 to 1 mix requires 5.12 oz. of oil

...25:1 (40mls oil per 1 litre fuel) Petrol has limited shelf life (as low as 30 days), so always mix with fresh regular unleaded petrol. the cap on the 2 stroke oil has a measurement on it to guide you ...

...often used 25 parts fuel to 1 part oil. From experience I find that 50 to 1 on the newer saws is too little oil and use a 40 to 1 mix to avoid the expense of having to replace pistons and

...used, not the engine the fuel mix is used in. Pick a 2cycle oil and mix it according to what the oil says. This is what I use on all my 2cycles and it's 100:1 - Optimol 20112 Oil 25 Gal Mix Bottle ...