Questions & Answers for: 2010 jeep liberty blend door

...jeep liberty 2010 no heat My blend air door is stuck on my 2010 liberty. I have removed the actuator panel on the drivers side and the middle door that controls the air flow to the dash is completely ...

...2010 jeep liberty blower motor has quit working on all speeds, is it dead sounding or only no air flow??? wow no symptoms posted only this goose chase deal. use the scan tool yet? see all DTC errors. ...

...Jeep Liberty 2010 The air conditioner only seems to be working/blowing through the bottom vents, and not the main vents. Usually a sign of a stuck blend door under the dash. Could be a faulty blend ...

...2010 Jeep Liberty just blows cold air? Blend door is not moving to open to the heater core. Coud be that the cable is not connected to the dash lever but if it's vacuum actuated the vacuum line could ...

...liberty blows hot air on driver side only. I removed both actuators and upper one at connection to the gears is loose and turning it back and forth no change in air. bottom one seems to change air ...

...2010 Jeep Liberty doesn't blow heat. I let the air out and the heater core is not clogged. no engine stated, 3.7L or diesel or what? i cant bet past let the air out. ok, i get it, you burped all the ...

2010 jeep liberty heat not working. I have replaced the blend door actuator, coolant level is good, and hoses to and from heater core are hot when vehicle is running and try to run heat. When changing

2010 jeep liberty only passenger side blows hot. Blend door working New thermostat and radiator. Help Not to worry friend, when my car go sick i avoided going to mechanic looking for DIY_Repair when I

no heat for 3 years in my jeep 2010 jeep liberty renegade Bad heater core, bad switch, bad heat blend door, stuck open thermostat ......