Questions & Answers for: 2008 mazda 3 low brake

...symbol with parentheses... what does it mean? car is a mazda 3 If it's red.. Then there's an issue with your brakes. Parking brake is left on, faulty parking brake sensor, low brake fluid,

...mazda 3 2008 gas pedal not responding hi .....my mazda 3 2008 hatch back gas pedal not responding .Car was in an accident and the body work juss finish.It start but no gas wen u press the pedal I ...

...2008 F350 Super Duty Crew Cab. Started getting "check brake system" error msg on control panel. Brakes went clear to the floor 3 times in wet weather, but still stopped me. Dealer claims no ...

...on my mazda 3 go's all the way the brake pedal on my mazda 3 go's all the way down to the floor First check the fluid level. The next thing is to have someone check and bleed the brake

...2008 check the fluid in master cylinder if low could still have air in the brake lines also make sure that when bleeding brakes keep pressure on pedal until bleeder screw completley shut off bleed ...

...Mazda Protege with brake issues. When you step on the brake pedal if feels as the anti-lock brakes are kicking in. The brakes pedal pulses. Any ideas? What you have sounds like warped rotors. They ...

...low fluid level, look for crack in brake lines and see if pads are really worn down and try bleeding the brakes. Good luck. Sounds like low fluid and or air in the line. check fluid level dont want ...

...2008 Mazda 3 2.3L I changed all four brake disks & pads on my cousin's Mazda 3 but the brake pedal continues to travel slowly down. It doesn't reach the floor but it does travel. Both under hard & ...

...2008 Mazda Tribute and I have a low brake pedal problem. The brake pedal sinks about 1-2 inches from the floor. Has anyone had a similar problem and what was the solution? I've replaced the master ...

Mazda Tribute 2003 Sometimes brake pedal will go down by itself when at a stop (of course foot on brake pedal) brakes squeak at low speed moderate pressure has ceramic pads noise from: anti rattle ...