Questions & Answers for: 2008 hummer h3 crank start

2008 Hummer H3 The trackion failed light on 2008 Hummer H3 The traction failed light is on clean abs sensors at each wheel.

the key is stuck in my hummer h3 nothing works how do i fix it you have to jump start it. the battery is dead.

...hummer h3 ryco oil filter part number hummer h3 K and N site part nos ...h3 k33hp2006..........h2k33hp1007,look on the site depends on engine,but good info,Kand N seems good enough,especially with ...

hummer H3 (2008) does not start and error message is "lock 1" your anti theft is activated. consualt owners manual I solved it but will not tell you how since you wanted me to pay for your advise. ...

2008 Hummer H3 idiling then shutting off/ hard cold start When I start my 08 Hummer H3 it'll initially start but then starts to choke then it will either kick over or die. I'm thinking

H3 hummer Here is a link to the step by step instructions for the fix. Easy to do. I had the same problem with my 06 H3 and fixed it myself and saved some serious $$$ http://www.hummerforums.com/forum

...Hummer H3 intermittent starting problem Recently had alternator replaced. 2 weeks of H3 running fine. Attempt to start, H3 would crank but not turn over. 10 mins later H3 started. Took it to a ...

where is the inside fusebox located on a h3 hummer The hummer H3 has only one fusebox which is inside the engine compartment behind the battery

2008 hummer h3 got C0136 Base brake system pressure circuit error on DTC and displays waning Traction off, Service stab sys. Whats the exact problem and any part to be replaced? My reference shows no

...2008 Hummer H3 ECU pinout? Normally yes we do. Everything here points to the BCM as though it does everything. I am puzzled. https://www.google.com/search?q=+2008+Hummer+H3+ECM+pinout ...