...2006 chevy trailblazer THE CAM SHAFT ACTUATOR IS LOCATED IN THE CYLINDER HEAD ON THE FRONT RIGHT HAND SIDE JUST ABOVE THE POWER STEERING PUMP. AFTER YOU REMOVE THE ACTUATOR CHECK TO SEE IF ANY OF THE ...
...UPDATED. Power steering pump whine is common. check for fluid foaming and level. Yes is it a whinning noise I was charged for altarnator and guess what it wasnt it it was a 15 dollar part idler ...
...2006 trailblazer Remove the serpentine belt, remove the power steering pump to get access. You might have to remove the upper radiator hose. NOTE: When changing cam or crank sensors your vehicle will ...
...2006 Isuzu ascended have a code 0014 and engine light on Its a cam over-retarded code. I believe this is a rebranded chevy trailblazer. I would start with an exhaust cam actuator which is located ...
change power steering fluid you can remove a lower hose, some have a bolt to drain the reservoir on the bottom. you can also use a squeeze suck pump.
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
