Questions & Answers for: 2005 hyundai accent timing mark

Question about 1997 Accent

1 Answer

2005 Hundai Accent Need to know how to line up timing marks, on the cam gear and on the crank gear? the marks should be faceing each other.if thats not it then they both face up.

Ad

...2005 Hyudai Accent, my cam could be off by 1 tooth. if my cam is off by 1 tooth, how can I tell? How do I fix it? Pull the upper cover off, set the engine at top dead center and see if you cams line ...

Ad

...Hyundai Accent the timing marks are as follows... the camshaft gear mark will be roughly in the 4 o clock position... the mark on the gear needs to line up with a small pointer on the rear cover. the ...

...2005 hyundai accent ? I just neet to know where to set the marks when I change the belt .if you know where i can get this info and maby a pic that would be great thanks With your Email Address I will ...

is a 2005 hyundai accent. timing marks ok,leads and plugs ok wat i hear is one or two valves morre bent just a litle bet,, wet and dry compretion  is going to tell  you the broblem.good luck

Question about 2005 Accent

2 Answers

...2005 Hyundai Accent. I replaced the timing belt, I get sparks, but won't start? Thanks. Click on the following direct Link. It has the Timing Belt Diagrams with Marks for the Camshaft and Crankshaft ...

Question about Motor 1995 Accent

1 Answer

...Hyundai Accent 1.5L SOHC In-Line 4-Cylinder Alpha Engine. Is also has additional - very helpful Instructional and Directional Diagrams. Let me know if this helped, or if you have additional ...

...settings for a 2005 1.3 Hyundai Getz a/c, as well as the procedure to ensure the timing is correct after replacing the cam belt . Thank you Mark....South Africa Torque settings for hyundai accent ...

Question about 2006 Accent

2 Answers

2005 Hyundai Accent wouldn't come on but all my fuses were good. I tracked it down to a loose screw in the dome light assembly and wrote all the steps I used to troubleshoot and fix it here: 1999 2005

...Hyundai accent How many links are between the marks on the chain attaching to the cam shaft. we already replaced the timing belt. we are looking for the positioning and how many links are supposed to ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...