Questions & Answers for: 2005 hyundai accent timing belt

...2005 HYUNDAI ACCENT, AND UPON COMPLETION, I GOT AN ERROR CODE OF 0340, WICH IS CAMSHAFT POSITION SENSOR "A" CIRCUIT (BANK 1 OR SINGLE SENSOR). THE MOTOR RUNS FINE, NO SOUNDS OR ANYTHING, AND I DROVE ...

...2005 Hyudai Accent, my cam could be off by 1 tooth. if my cam is off by 1 tooth, how can I tell? How do I fix it? Pull the upper cover off, set the engine at top dead center and see if you cams line ...

2005 Hyundai Accent won't start I have a 2005 Hyundai Accent with approx. 134,000 miles on it. I stopped at a stop sign and the car just cut off. I tried to restart it but it won't start. It does turn

2005 getz cuts out fuel filter-fouled plug?-fuel pump going bad-timing belt may need replaced maybe stretched causing timing off-plugged or globulated injectors(get seafoam walmart read directions ...

...2005 Hyundai Accent. I replaced the timing belt, I get sparks, but won't start? Thanks. Click on the following direct Link. It has the Timing Belt Diagrams with Marks for the Camshaft and Crankshaft ...

...2005 Accent is skipping. When it gets bad I get a code for a miss fire on Number one. Already replaced the plugs. Checked the spark at the coil by pulling the wire off and holding close to it. Seemed ...

...if timing is off have to replace belt on 2005 accent the timing belt should be changed at about 60,000 miles, I would advise you to get it done, if it were to break it can cause serious engine ...

...2005 hyundai accent hatchback is it possible to have timing belt on accent jump enough to not start but not actually break is there anything known on accent that wont show up in code that could cause ...

...Hyundai Accent 1.6 CDX 2005 model? Hello jimturner10: My name is Roger and I will help you. According to Autodate the timing belt should be replaced every 60,000 miles or 48 months.The manufacturer ...

...settings for a 2005 1.3 Hyundai Getz a/c, as well as the procedure to ensure the timing is correct after replacing the cam belt . Thank you Mark....South Africa Torque settings for hyundai accent ...