Questions & Answers for: 2005 dodge stratus fuel injector

code 304 cylinder 4 missfire Check the spark plug wire for #4 Check the spark plug #4 Check continuity on the coil pack for the #4 spark plug lead Check the connector on the fuel injector--#4

...dodge stratus r/t 2005 tha code in tha machine is P0205 and P0305 . What is posibility problem? thanks the fuel injector for cylinder # 5 is not working correctly. you can check the resistance of the ...

...had a short or no good how can i tell? remove the injector but leave it hooked to the wire harness. Have some one turn the engine but stay clear. Look to see if its spraying fuel. If not its

...2005 2.7l stratus engine showing code p0175, can anyone tell me what this code is? i have a 2005 2.7l enginge showing code p0175 can anyone tell me what this code means. code p0175 refers to --system ...

...dodge stratus turns over but won't start chain drive/belt drive engine ? have you got gas at the engine in the fuel rail, are the injectors firing, do you have spark at the plugs. is there enough ...

2005 Dodge Stratus jerks at 2500 rpm and wont drive over 60mph. if you try to go over 60' it jerks. You have an issue with fuel delivery, once the car gets to 60mph the car will not get the required ...

not getting fuel check the fuel system particularly the fuel pump, fuel pressure, fuel injector and its connection. Aslo check the ignition system. Ask the garage to do it for you as fuel is dangerous

...2005 dodge stratus set for about a month and a half without periodically starting it. I'm ready to start driving it again and it wont start. It has gas.it wants to start and will turn over but wont ...

2005 dodge stratus no start no crank - CarGurus www.cargurus.com > Questions > Dodge > Stratus CarGurusJun 12, 2014 - 2005 dodge stratus no start no crank - i have a 2005 startus sxt and itwont start.

...2005 dodge stratus 2.7L V6. Where can I locate the knock sensor? Big job. Requires removal of intake manifold and fuel injectors, as sensor in in the 'valley' between the cylinder heads. See link for ...