Questions & Answers for: 2004 pt cruiser ac recharge

...PT Cruiser stopped working... I turned on my AC in my 2006 PT Cruiser for the first time this year and got nothing but hot air. The vehicles got low mileage and I haven't used the air for quite some ...

2004 pt crusier shifting down hard is it transmission I have an 2004 pt with 60,000 miles on it , it is shifting down hard could it be the transmission ? Sounds like you have more than one problem ...

...PT Cruiser I have a 2006 PT Cruiser took it in for ac recharge-ac was blowing cold air out when car moving but warm when idle-was told a need a new compressor, drier, and liquid line. $1400. Think ...

...pt cruiser and my ac is not colling i have a 2002 pt cruiser and my a/c is not colling enough, i would say"it's not working" any tips Your car ls most likely low on refrigerant. If you're handy, you ...

...2004 pt cruiser 2.4L turbo engine. first you must recover the freon from the system then change the line always installing new orings, evacuate the system "which means to put it into a vacuum to ...

...2004 pt cruiser gets hot when l turn on the ac l had the rad flush no help the thermostat seems to open up. l dont see any leaks . the gage is always on the half mark the minute l kick the ac the car ...

...pt cruiser ac is blowing hot air after a recharge and.... my 2003 pt cruiser ac is blowing hot air i got a recharge still blowing hot air my uncle hooked up the computer u kno the one that scans the ...

...side connection located to recharge the ac on a 2005 chrysler pt cruiser i need to locate the low side connection in order to recharge the ac It is in the larger of the 2 AC lines from the

...PT Cruiser Touring (non turbo): overheated, a/c on, stop and go traffic. Let it cool down, added water, drove hours at hwy speed with a/c on, no overheating. Today, stop and go traffic, ac on, ga ...

...2004 pt cruiser.put back together can't get belt on power steering pump and ac pulley to stay on it screeches as if bad belt and comes of pulley.brand new belt.how can u tell if tensioner is bad or ...