Questions & Answers for: 2004 impala headlight relay

2004 chevy impala no headlights checked all fuses all ok head light relay pulls in but no headlights or thail lights. day lights run ok when pull in passing switch lights come on while holdiong switch

...2004 chevy impala i check the fuse and they are fine and i also got new light bulbs and they still dont work It sounds like your low headlight relay may not be working. not sure on this particular ...

...high beam head lights are out. Coil Both low and high beam head lights are out. Coil in fuse is not broken. this is one of two Problems The Headlight RELAY has Failed or the Headlight SWITCH has ...

The headlights will not come on with either the pull switch or the auto sensor. All I can get are the parking lights. Any ideas, and any idea where the headlamp relay is? I can't find it anywhere. ...

...2004 impala went out have parking lights no blown fuses There are relays for the head lights,but see if the bright lights work also,the bulbs maybe blown,not uncommon for both to blow,then there is ...

cannot get the headlights to turn off? They have a auto feature with a sensor bulb in the dash. Hello! First, pull the headlamp relay...Do lights go out? Replace relay...Next pull the DRL relay...Do ...

2004 Impala- I'm looking for a simple solution to de-activating the automatic headlights at dusk feature. under the hood in the fuse/relay box there will be a relay for the automatic headlamps, also a

...headlight relay on 2006 ss impala all lights work except headlights high and low beams GM does not use a headlight relay, the switch contains a safety cut off switch to avoid short induced fires. You ...

...2004 chevy impala The switches used in the headlight relay operate via one circuit to control the parking lights, another current for driving lights and the third operates the high beams. One or ...

...impala and my right headlight doesnt work i put new bulb and balist it just blinks. is it the fuseor fuse relay? i was thinking on buying a fuse relay with wires and connect it to my battery to ...