Questions & Answers for: 2004 hyundai elantra driver side

...2004 Hyundai Elantra. I need to know how to or what tool is needed to remove the inside panel to get at the mounting screws to replace the mirror. tools: philip head screw driver, flat head screw ...

...2004 MY XG350 BE-46 - BE-47 KEYLESS ADAPTER CABLE INSTRUCTIONS: Connect the keyless adapter cable to the Hi-Scan Pro DLC cable. Plug the keyless adapter into the vehicle's 10-pin multi-purpose ...

...module Where is the driver's side fascia panel and how do I remove it? Thanks Guy Again, the remotes can only be programmed by a Hyundai Technician (ETACS - Electronis Time and Alarm Control

Hyundai XG350 The instructions I found say: 1. Access alarm system control module located behind driver?s side fascia panel 2. Ensure memory switch is in off position. 3. Turn ignition to on 4. Wait 5

hyundai troubleshooting code p0010 P0010 is camshaft position actuator malfunction. Hope that helps elantra p0010 is most likely the filter for the oil control valve aka the variable valve timing ...

2004 hyundai elantra The fuse panel is behind the small storage compartment built into the dash panel on the left side. Open the compartment, then pull up and out to remove. Look in the hole and it is

2004 hyundai Elantra,where is the fuse located for the cigerate lighter. it wont work when I plug my cell phone charger I believe it's 15 amp fuse listed on the interior fuse panel "Room LP" lower ...

Where is driver side fascia panel Hyundai Santa fe? Open driver door,panel end of dash

...Hyundai Elantra 2006-2008 Hyundai Sonata 2006-2008 Hyundai Tiburon 2006-2008 Before servicing the vehicle, refer to the Precautions Section. Remove or disconnect the following: The negative battery ...

...> hyundai > fuses-and-relay-h... Fuses and relay Hyundai Elantra 2000-2006 ... For the Hyundai Elantra 2000, 2001, 2002, 2003, 2004, 2005, 2006 model year. Fuse box located. The fuse box for