...2004 yukon denali with 100,000 mi today my oil pressure indicator went down to 0 and the alarm went off. i took it to my mecanic we thought we could replace the switch, and after that 300.00 dollar ...
...Yukon requires a 5w-30 weight oil. If the oil used is correct, you will want to have the pressure sending unit and gauge checked. A mechanic will install a "mechanical" oil pressure gauge tester on ...
...GMC Yukon with a 5.3 engin my 2004 yukon engine oil sensor is at its highest, what is the problem I am not familiar with your specific vehicle but most oil pressure sending units are located by the ...
...bad on my 2004 GMC Yukon You hook up a mechanical oil pressure gauge at the oil pressure sending unit oil port and test the pressure, it should be about 25 PSI hot idle and about 50PSI at 2-3,000
Question about 2005 Yukon
2004 Yukon XL 1500, with the car off the radio circuit draws alot of current and drains my new battery in 2-3 days. Also maybe seprate issue my oil presure gage does not reset to zero. I have pulled ...
Question about 2004 Yukon
oil pressure just vanished when I pulled off of hwy,,,bells where going off.message change oil ,,oil gauge reading 0,,,,,oil is full in crankcase I topped up oil.still bells and message no oil pessure
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions