Questions & Answers for: 2004 gmc yukon oil pressure

2004 yukon xl oil and fuel gauges do not work. The oil pressure gauge went out first. the fuel gauge followed. The speed odometer was also acting strange starting at 45 instead of 0. I disconnected ...

Ad

...GMC Yukon 5.7L EFI just fired her up, the electronic oil pressure and water temp gauges fluctuate like crazy oil pressure jumps between 40 to 60 psi. The gauges were not this reactive prior to the ...

Ad

2004 GMC Yukon won't start if less than 1/4 tank of gas Started having a problem starting my 2004 Yukon about 1 year ago when there is 1/4 tank of gas or less. Starts just fine if it's above that mark

...Yukon Denali, oil pressure gauge malfunction 2006 Yukon Denali, oil pressure gauge pegs out at 80 however intermittently when rpm's get over 2000 gauge will drop to 0 until rpm's come back below 2000 ...

...2004 GMC Yukon XL. The oil pressure gauge and gas gauge sometimes goes crazy. The oil wil peg to the right and the gas will move to empty. I had a guy check it and he said the oil pressure was fine ...

Question about 2004 Yukon

2 Answers

...Yukon requires a 5w-30 weight oil. If the oil used is correct, you will want to have the pressure sending unit and gauge checked. A mechanic will install a "mechanical" oil pressure gauge tester on ...

2004 GMC Yukon with 4.8L engine; oil pressure gauge pegs to the right; replaced sender; "tire pressure low" light stays on.? check your spare tire for proper inflation its tripped me up before

2004 gmc yukonis there any recall on this type of situation? Yes there is a recall for erratic gauge readings. They will supply new instrument cluster and labor to install it at no charge to you. Tell

...bad on my 2004 GMC Yukon You hook up a mechanical oil pressure gauge at the oil pressure sending unit oil port and test the pressure, it should be about 25 PSI hot idle and about 50PSI at 2-3,000

Question about 2004 GMC YUKON XL 1500 85250 Evolution CTS Gas Programme

1 Answer

2004 gmc yukon what causes speedometer to work sometimes? It is most likely the stepper motors for the gauges. I had all of mine replaced by a company in Louisville for around $125. Mine was more the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...