Questions & Answers for: 2004 dodge ram 4x4 shift

...ram 4x4 auto put trans in and it wont shift 88 ram 4x4 auto just put trans in and it wont shift at trans linkage is fine and moveing but the input shaft wont move once it was put in need help Sounds ...

Ad

Question about 2001 Ram 1500 Truck 2WD

2 Answers

...ram 1500 4x4, will not go into park, all other gears work fine, It stated after it would not start in park. I shifted into nuetral and it started,drove it from home to the lake, about twelve miles, ...

Ad

Question about 1999 Ram 2500 4WD

2 Answers

...dodge ram 4x4 transfer case I have a 1999 dodge ram cummins 4x4 and when i put it in lo range it feels like the transfer case is slipping it also does it in reverse high range seems to work fine i ...

Question about 2001 Ram 2500 Truck

1 Answer

...ram 2500 4x4 wont shift into od 95 ram 2500 4x4 after replacing exhaust/ having front end work done it wont shift into od. od on/off button still works. I looked for wiring issues and found all wires ...

...Dodge ram 1500 Hemi. Thanks The clicking sound could be a broken exhaust manifold bolt which causes a exhaust leak that makes a clicking sound. The 4X4 problem could be just a linkage

the 4x4 service indicater stays on while driving The 4x4 service indicater stays on while driving could it be low fluid if its a manual shifter then the linkage needs an adjustment

Question about 2004 Ram 2500

1 Answer

dodge ram 4x4 will not shift...linkage is stuck...what do i do? I've worked on Dodge 4x4's for years and i see a lot of rocks getting stuck at the t-case end of the linkage as there's a nice flat spot

Question about 2006 Ram 2500

1 Answer

2006 dodge ram 2500 wont go into gear? 2004 Dodge Ram Cummins 4x4 will not shift out of 1st without letting off pressure to accelerator. Just started this prob today... all other shifts are normal.

dodge ram won't go in to 4x4 where can I My 98 dodge ram won't go in to 4x4 where can I start i would start with the transfer case . check fluid level and also check your shift linkage to transfer

...4 low only 4 high I think its linkage or angle after doing 4"lift ... Would this fix work for a 2003 jeep grand Cherokee Laredo? ... I have the same problem but on a dodge 4x4 ram 1500 how do I

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...