Questions & Answers for: 2004 cruiser problems

...2004 PT Cruiser removed bolts but cannot remove alternator. space and area problem. you may have to raise vehicle,remove wheel & plastic inner fender & take it out through the wheel well.it ...

Ad

2004 PT Cruiser (mileage 115,200) Have kept up with oil changes, tune ups, and small repairs. What is the failure rate of problems with the timing belt sods law says if you dont change it every 60k it

Ad

Question about 2004 PT Cruiser

1 Answer

...2004 pt cruiser Have you changed the plugs and plug wires? I would start there VERY first thing. Then if the problem continues, look for vacuum leaks, clean injectors and if needed, do an engine ...

...cruiser with rough idle but drives good rough idle but drives good I had same problem...Clean thottle body...Take hose from air cleaner off,two silver clamp...Take cover off throttle cable,open ...

Question about UltraTech Custom PWC Jet Ski Cover Blue Fits - YAMAHA Wave Runner FX Cruiser 2002 2003 2004 2005 FX Cruiser High Output 2004 2005

1 Answer

2004 waverunner fx cruiser, ran great last time out. Now hard to start and wont run on high speed. Nothing over 6 mph. Last time out it ran great. Now, its hard to start, and wont go above 6 mph. ...

Question about 2004 PT Cruiser

1 Answer

alternator problem on 2004 PT Cruiser my battery drains when it is not running and while running, HELP Replace alternator.

should the 2004 PT Cruiser GT Turbo spark plug gap be set to? The engine starts hard, misfires, cuts out at 2500 rpms, idles very rough. I'm guessing you have a timing problem. Have that checked first

...2004 pt cruiser shut off and will not even try to start. Shut the car up and came back next day and the alarm will not stop sounding. What can be the cause and how can i fix these problems? 2001 PT ...

...pump on 2004 pt cruiser how to access fuel pump Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem. Chrysler PT ...

2004 pt cruiser instrument cluster not functioning Check fuses first. Then remove and replace the IP plug. this usually takes care of the problem. After that , replace the IP.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...