Questions & Answers for: 2004 cavalier brake lines

...2004 chevy cavalier? has to be bench bleed.remove master cylinder need fittings that fit where your lines enter the side of the cylinder {get a bleeder kit at your local parts store}kit will have ...

My clutch lost all pressure right after 100K mi I bought the car at 74K and it ran great. I put on some new tires, and a month later the clutch, which until this time seemed really stiff, lost a lot ...

...Cavalier. It's a 2004, with a manual transmission. It started with the car not wanting to go into gear, then yesterday the clutch pedal went straight to the floor. I talked with my wife and she ...

cavalier. have a slim jim but its not helping. most people use a coat hanger for this but i found a better way go to your parts store and get a stick of brake line (there cheap about $5.00) then smash

U1064 code & can't check the codes on a scanner. engine starts & dies. when it was running the abs light & brake lights were on & theft & service lights were on. Sounds like a ...

brake lines. This is usually caused by a very low brake fluid in the master cyclinder.To fix this problem fill up the master cyclinder with brake fluid and bleed the front wheel brake cyclinders until

2004 chevy cavalier wont start. I have a 2004 chevy cavalier with a 2.2l ecotec engine. The other day I performed a brake job. Before the brake job the car was running ok with the only code showing up

2004 cavalier wont start I have a 2004 cavalier that has the 2.2l ecotech engine. The other day it was running fine then I decided to do a front brake job. After the job was done the car suddenly ...

Clutch pedal sticks on floor I had to repalce the master cylinder and the hydraulic line app. 10K miles ago. Recently the master was out of fluid so I tried to bleed the system. WHen I finally got ...