Questions & Answers for: 2003 pt cruiser loss power

2003 pt cruiser won't turn over. My 2003 pt cruiser won't start. I had a p0344 i think it was, cam sensor circuit intermittant code. It was idling funny in park. I replaced the sensor and it ran great

...2003 PT Cruiser won't go in drive or any other gear. It will lurch forward, go a little bit and then it seems like the tranny is slipping. We checked the fluid and the levels are fine. THE ...

2003 chrysler pt cruiser air conditioner is putting out only hot air This is only a DIY check list of probable faults. 1. Electrical failure thro' the Fuses and Relays that energise the Compressor ...

...PT cruiser...power steering?? PO551 fault code on PT cruiser...power steering pressure switch. Engine light has now gone off, do I still replace or is it just acting up? i would check the power ...

No power to the downstream oxygen sensor 2003 PT Cruiser The signal line and the power for the heater both come from the PCM.

I have a 2008 Chrysler PT Cruiser with the 2.4 liter engine it has a total loss of electrical power any ideas?ower possible fuseable link

I have a 2003 PT Cruiser Touring Edition that makes a loud humming noise while driving but stops when you turn to the right. What could be causing this? Right hand front wheel bearing is worn!

...2003 to 2010 Chrysler PT Cruiser: 6.5 qt (6.2 liters)Mar 4, 2015 Which coolant for a Chrysler PT Cruiser? - PT Cruiser Repair pt.cruiser.repair/663/which-coolant-for-a-chrysler-pt-cruiser/ 2001 pt ...

pt cruiser 2003 2.4 turbo code p0552 stalled while driving 25 mph P0552 CHRYSLER - Power Steering Pressure Sensor Circuit Low Input https://www.autocodes.com/p0552_chrysler.html P0552 - Power Steering

i just put a new fuel pump in my 2003 pt cruiser and i dont have power back at the pump but i have power at the relay How many powers do you have at the relay?