...cylinder head bolt torque specs. thanks Step 1 torque to 59 ft pounds 2. Loosen one full turn 3. 37 ft pounds 4. 68 ft pounds Use torque sequence below Hi wat is da torque spec cylinder head v6 ford ...
...2003 mazda 6, 3.0 v6 standard and i need the main bearing torque specs and cannot find them anywhere! Please someone help, by the way its for the bottom end!! Please HELP I'm sending you the torque ...
cylinder head bolt torque chevrolet 3.4 cylinder head bolt torque, chevrolet 3.4 intake manifold bolt torque, chevrolet 3.4 here is the troque spec for the cylinder heads. Cylinder Head Bolt First ...
...Chiltons... Step 1: 30 ft lbs Step 2: 44 ft lbs Step 3: Plus 90 degrees Step 4: Plus 90 degrees Here is the tightening sequence... 10 4 2 6 8 7 5 1 3 9 please specify your volkswagen jetta year
...jetta 1.6 turbo diesel,what is the cylinder head bolt torque spec? !st thing is get the revised head gasket (used on 1993 up) for this engine from VW or Felpro, always use new head bolts or a ...
...1.9 dohc cylinder head torque specs and sequence Cylinder head bolt tightening procedure: CYLINDER HEAD BOLT TIGHTENING SEQUENCE: INTAKE SIDE 8 4 1 5 9 7 3 2 6 10 EXHAUST SIDE In sequence, torque the ...
...intake manifold, upper to lower bolts 1995 and later-----89 in-lbs -for cylinder head bolts 2001 and later----step 1--37 step 2--Turn an additional 120 degrees I hope that this helps you
Question about 2003 Grand Am
...2003 CADILLAC CTS; 6 CYL; 2WD; AUTOMATIC; 100,000 MILES. I am repairing the heads of this car. whats the torque I need to apply? Complete Torque Specs List ' Cadillac CTS-V Forum ...
Question about 2003 Lancer
2003 Mitsubishi Lancer that is fitted with a 4G18 1.6 engine. Have on after market cylinder head gaskets. I'm looking the torque specs to complete this job. Question edited for clarity. Question moved
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions