Questions & Answers for: 2003 ford escape intake manifold

...ford escape v6 find & change spark plugs i found front 3 plugs, where are the other 3 and how do i get to them? i also have a ford escape. the other three plugs are under the upper intake manifold. ...

...intake manifold and vacuum hose. Bad Idle Air Control Motor (IAC) Low compression (170 psi + is OK) Start cleaning and repair these trouble spots and see is there any improvement. ==== For more ...

intake manifold taht would normally enter the atmosphere. Fuel vapors are transferred from the tank and throttle body to a canister where theyre stored when the engine isnt running. When the engine is

...2003 ford escape i do not see them would like to change them! thank you for your help **** You actually do see them you just don't realize it. When you look at the motor from the top down you should ...

...2003 Ford Escape. Since 3 months after i bought the car the check engine light has been on. The car has a rough idle and hesitates when accelerating. After the car has shifted gears and the rpm are ...

...2003 Ford Escape 3.0L VIN 1 I have the following codes, PO316,305,306,300,304. Are these codes caused by a possible vacuum leakl? If so what would be the likely spot? Forget the 300 & 316 The ...

...2003 ford escape 3.0 engine whistles and looses power going up hill I've check the belts and thats not the problem I've heard that it most likely wlll be a vacuum leak can you tell me were I ...

...2003 ford escape. It runs rough when i start it or when im idling and on inclines. When i had the check engine light read (again) it said random misfire, misfire in the first 1000 rpm and misfire is ...

...2003 Ford Escape has started running rough/seems to be missing at idle complicated problem if im not seeing the viehical my first guess is on the intake manifold you have o rings sealing it to the ...

Can the #1 spark plug be removed without removing the intake manifold? SEE YOUR FORD DEALER