rear wheel bearing, even though I changed it at the same time as the passenger, doesn't make the noise at all. I'm from the United States, East coast. bearings squeal..usually....... .brakes grind....
...rear tire. I think it is the bearing is the noise is constant when you are driving is a bearing , is the noise is when you brake, check the brakes..jack the car and spin the tire you will here the ...
2003 ford focus thier seams to be two different typs for the rear Yes your right the complete hub assembly and the pressin bearing. My parts store sells it in brand name for over $49 and the white box
...2003 ford focus front wheel bearings how do i replace the front wheel bearings on a 2003 ford focus. remove the hub and spinle ,tie rod end ,axle nut.ball joint,and seperate from strut and then have ...
...rear wheel bearing and drum is a single assembley this is removed by taking out 4 bolts fron behind the backing plate the drum and the wheel bearing can't be seperated and the cap over where the nut ...
bearing should pop out in your hand, you have to replace the seal when you pull the rotor off. Sometimes the race on the inside gets stuck, sometimes it welds itself to the spindle, depends on how hot
rear wheel bearing and the wheel still has play should i replace the stub axle also there were some recalls on those control arms and/or trailing arms make sure the movement you feel is not there btw.
...focus on that part or that wheel. You can jack up the wheels and see if the wheel bearings are loose. If you have one with a lot of play than that could be the problem. While you have the wheels off ...
Question about 2003 Crossfire
what is this creaking noise coming from the rear end of my chrysler crossfire? I have had the car looked at several times, I replaced the rear shocks, rear link arms, had the wheel bearings checks and
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions