Questions & Answers for: 2002 kia sportage vacuum lines

Question about 2002 Sportage

4 Answers

...2002 Kia Sportage 4x4 and the vacuum hoses for the 4WD are not there. I need a diagram so that I can get the hoses and hook them up. And, are there any special things I should know about hooking them ...

Ad

...is wrong. if your mechanic isn't sure but "thinks" it's this, find a better mechanic. Try this link: ...

Ad

Question about 2002 Sportage

1 Answer

4 wheel driver not working transfer case is engaging front drive shaft but no power going to hubs. Internally, hubs appear to be in good condition. I had this happen to mine, and it was a cracked ...

Question about 2002 Sportage

1 Answer

...vacuum on both lines from up on top at the canister, then most likely the seals in the hubs are shot. "Make sure you separate the two lines at the "T" and make sure you test from up on top". It's too ...

Question about 1999 Sportage

2 Answers

...2002 Sportage 2 years ago. Check the vacuum lines running from the transfer case to the hubs, one of mine was cracked, and therefor the system cannot '****' the locking hubs in place. It cost me 50 ...

...kia sportage four wheel drive and it will go into four wheel drive sometimes,you can hear it trying to kick in.the front drive shaft goes around all the time it is trying.it makes a faint grinding ...

...kia sportage when in nuetral revving up and when in park it also takes off reving when i barely press on the gas It is probably a faulty Throttle Position Sensor. Also double check any vacuum lines ...

2002 KIA Sportage 4x4. 4x4 not working 2002 KIA Sportage 4x4. Light is on dash as it is engaged but no 4x4 - horrible in snow even with studded tires. What can I look for to help fix??? Is the four ...

...kia sportage 2l wont engage four wheel drive light comes on but doesnt engage This is a long/hard one to answer as a few things can cause this. First, check the vacuum lines running from the engine ...

Question about 2002 Sportage

1 Answer

...2002 Kia Sportage. The parts are coming in a kit from a website that has those parts, the oil, and the O-rings. Ive never done it before but the process seems easy enough. Is there a manual or video ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...